Be Prepared to Drill Through Rock

December 25, 2017 11:44 pm Published by Leave your thoughts

Drilling through rock—whether a solid mass like granite or sandstone—is not a two-minute job, by any means. Hard rock can test the patience of most drilling contractors, especially when their equipment gets damaged or they run into more rock layers than originally planned. However, when done correctly, the job will be accomplished on time and without incident. This is why residential, commercial and industrial property owners should take advantage of professional rock drilling services. Plus, the pros own the right equipment and possess the skills to do it properly.

The best course of action is to hire a professional team for directional boring services in Roseville, CA. Here’s how contractors get ready to drill through rock.

They need to be prepared

The first step in the preparation process is to arrive at the job site with the right equipment, tools and important supplies for rock boring, as well as an appropriate-sized drill rig. Which size rig to use is usually determined by the requirements for the job. Several factors help the contractor in choosing the right type of drill, including ground conditions and the size and dimensions of the rock. Rock is rated using pounds per square inch (psi) and has a starting range of 2000 psi to 3000 psi, as drilling in different soil conditions will require the right amount of rotational torque.

They need to plan

With a plan, a rock drilling project can be successful. Without a plan, time and money can be wasted. A drilling contractor or company that has been in business for a long time will have the proper equipment for rock drilling, and will therefore have the necessities on hand.

The next step in a rock boring task is to lay out a drill plan. Drilling rock does not simply mean using just any giant drill to break straight down the middle of a rock formation. The contractor needs to determine way ahead of time a few key factors, including how far back they need to set the drill rig, and knowing the steering timing to avoid hitting underground utility lines.

They need patience

To be successful, big rock drilling projects require a great deal of patience on the part of the contractor. The drilling equipment needs time to do its job, as does the cutting portion of the drilling. Rig operators need to be patient by avoiding putting too much pressure on these bits. Remember that although the equipment is easy for a professional to use, a skilled driller will be ready for the frustration that comes with drilling rock. Impatience will likely lead to problems when drilling is taken too fast—including destroyed tools and increased project costs.

To learn more about directional boring services in Roseville, CA, don’t hesitate to contact the skilled and knowledgeable drilling team at Es7 Comm-2 U, Inc. Our services include thorough planning before drilling ever begins, preventing damage to property and underground utility lines, and keeping everyone safe. Feel free to call us anytime!

Categorised in:

This post was written by Writer

Leave a Reply

Your email address will not be published. Required fields are marked *